E6B Practice Problems: 10 Worked Questions

These E6B practice problems test time, fuel, groundspeed, wind correction, density altitude, loading and takeoff-chart interpretation through 10 original questions with worked answers. Record your choices and units before opening the three answer groups; the fictional scenarios are study exercises, not actual FAA test items, aircraft performance data or flight approvals.

By Sam Whitaker, Student PilotPublished · 9 min read
Two miniature learners compare a silver flight computer and cream worksheet beside a curved wooden bench
Anonymous miniature learners compare their reasoning; the props show no usable calculation, exam result, endorsement or flight approval.
On this page
  1. What facts should you keep straight before starting?
  2. Can you solve time, fuel and groundspeed problems?
  3. Can you separate crosswind correction from density altitude?
  4. Can you recalculate loading after fuel burn?
  5. Can you read a distance chart without inventing capability?
  6. Check yourself
  7. How should you review a missed answer?
  8. Frequently asked questions
  9. Sources and review
  10. What should you practice next?

Start with the aircraft performance hub and the E6B walkthrough if the methods are new. Use a mechanical or electronic flight computer, then check the order of magnitude independently.

What facts should you keep straight before starting?

Keep the quantity, unit and reference system attached to every number.

Study distinctionWhat to rememberPrimary source
Time and speedKnots are nautical miles per hour; convert minutes to hoursPHAK Chapter 16, Basic Calculations
Heading and trackWind changes the heading needed to maintain a course and the resulting groundspeedPHAK wind-triangle discussion
Weight and momentDivide total moment by total weight; use the same datum and moment scalePHAK Chapter 10
Performance outputMatch chart conditions, inputs and distance endpointsPHAK Chapter 11
Scope of practiceA calculation must be explained and assessed against actual limitationsACS Tasks I.D and I.F

Award one informal point per correct item, up to 10. There is no passing threshold or predicted FAA score. For learning, also explain the method and reject the other choices. The ACS covers much more than this sample.

Can you solve time, fuel and groundspeed problems?

Questions 1–4 use constant exercise conditions; only questions 1 and 2 share a cruise segment.

ItemGivenFind
1Distance 72 NM; groundspeed 96 knotsCruise-segment time in minutes
2Item 1's time; constant 7.2 US gallons/hourCruise-segment fuel
3Distance 120 NM; elapsed time 75 minutesGroundspeed in knots
4True course 090°; TAS 110 knots; wind FROM 090° true at 20 knotsTrue heading and groundspeed

1. How long is the 72-NM segment at 96 knots?

  • A. 27 minutes.
  • B. 45 minutes.
  • C. 75 minutes.

2. How much fuel does that cruise segment consume?

Use the time from question 1 and the supplied constant 7.2-US-gallon/hour rate. Exclude start, taxi, climb, descent, contingencies and reserves from this arithmetic exercise.

  • A. 3.24 US gallons.
  • B. 7.2 US gallons.
  • C. 5.4 US gallons.

3. What groundspeed covers 120 NM in 75 minutes?

  • A. 96 knots.
  • B. 160 knots.
  • C. 1.6 knots.

4. What does the direct headwind do to heading and groundspeed?

Assume steady wind and maintain the stated true course. All directions in this item use true north; variation and deviation are not supplied.

  • A. True heading 090°, groundspeed 130 knots.
  • B. True heading 090°, groundspeed 90 knots.
  • C. True heading 090°, groundspeed 110 knots.

Record four choices before continuing. The E6B guide connects calculator setup with a separate arithmetic check.

Can you separate crosswind correction from density altitude?

Questions 5 and 6 ask for different quantities: a wind solution and an approximate atmospheric altitude.

A north wind blows south across an eastbound true course; the exercise supplies 100 knots TAS and 20 knots wind

Original question-5 setup, not a solved wind triangle or real weather. The arrow shows where the air moves; FROM 360° true means a northerly wind. Arrow lengths are not a speed scale.

5. What heading and groundspeed maintain this eastbound course?

True course is 090°, TAS is 100 knots, and steady wind is FROM 360° true at 20 knots. Solve for true heading and groundspeed, rounded to one decimal place. No magnetic or compass conversion is requested.

  • A. True heading 101.5°, groundspeed 98.0 knots.
  • B. True heading 090.0°, groundspeed 80.0 knots.
  • C. True heading 078.5°, groundspeed 98.0 knots.

6. What is the approximate density altitude in this exercise?

Pressure altitude is 3,000 feet and outside-air temperature is 30°C. For this question, use standard temperature 15 − 2 × (pressure altitude/1,000) in °C, then DA ≈ PA + 120 × (OAT − standard temperature) in feet. Humidity is not separately included.

  • A. Approximately 5,520 feet.
  • B. Approximately 3,000 feet.
  • C. Approximately 6,600 feet.

The 120-ft/°C shortcut is an approximation discussed in FAA Safety Briefing, not an aircraft-specific takeoff chart. Review density altitude before substituting any altitude into a performance calculation: the actual chart's labels control.

Can you recalculate loading after fuel burn?

Questions 7 and 8 use one fictional loading condition, with all arms measured positive aft of the same datum.

Fictional loading starts at 2000 pounds and 90000 pound-inches; 20 US gallons burn at 6 pounds per gallon and a 48-inch arm

Original arithmetic inputs, not an actual airplane loading sheet. Initial totals include the fuel that will be burned. Treat the 48-inch fuel arm as constant; no weight limit or CG envelope is supplied.

7. What is the initial center of gravity?

Total weight is 2,000 pounds and total moment is 90,000 pound-inches, expressed as full moment rather than a divided moment index. Find inches aft of datum.

  • A. 0.045 inch.
  • B. 45.00 inches.
  • C. 22.22 inches.

8. What weight and CG remain after the stated fuel burn?

Burn 20 US gallons, using the exercise's 6 lb/US gal and constant 48-inch arm. Nothing else changes. Round the new CG to two decimal places.

  • A. 1,880 pounds and 44.81 inches aft of datum.
  • B. 1,880 pounds and 45.00 inches aft of datum.
  • C. 2,000 pounds and 42.12 inches aft of datum.

Do not infer airworthiness from a calculated CG alone. Review the weight-and-balance guide for aircraft-specific records, limits and flight-phase checks.

Can you read a distance chart without inventing capability?

Questions 9 and 10 use an expressly fictional table that allows linear temperature interpolation within 20–30°C.

Assume one fixed pressure altitude, weight and configuration, zero wind, the specified technique and a dry, level, paved runway. Total distance means start of takeoff to 50 feet above the takeoff surface. The chart supplies no grass, wet-runway, slope or other correction.

Temperature (°C)Fictional ground roll (ft)Fictional total to 50 ft (ft)
209001,400
301,1001,600

9. What total distance does the table give at 25°C?

Use only the supplied assumptions; retain the requested total-distance endpoint.

  • A. 1,000 feet.
  • B. 1,600 feet.
  • C. 1,500 feet.

10. Can this table establish performance on wet grass?

Suppose a calculator offers an editable percentage field, but no applicable wet-grass data or correction is available.

  • A. Yes; any percentage makes the fictional result approved data.
  • B. No; obtain applicable aircraft information and resolve the unsupported conditions.
  • C. Yes; the ground-roll column already accounts for every runway surface.

Review the takeoff and landing chart guide for the distinction between obtaining a number and assessing the actual operation.

Check yourself

What are the answers and explanations for questions 1–4?

Show the answer
  1. B — Time is 72/96 = 0.75 hour; multiply by 60 for 45 minutes. A decimal hour is not a decimal number of minutes. Choice A would be only 0.45 hour; C does not match the distance at the given speed.

  2. C — Fuel is 7.2 × 0.75 = 5.4 US gallons. Multiplying by 0.45 produces A, while B assumes a full hour. This is segment consumption, not sufficient fuel for the entire flight. The PHAK navigation chapter explains time and fuel calculations.

  3. A — Convert 75/60 = 1.25 hours, then 120/1.25 = 96 knots. Dividing by minutes gives 1.6 NM per minute, not 1.6 knots; treating 75 minutes as 0.75 hour produces 160 knots.

  4. B — A wind from 090° blows directly against the eastbound course, so groundspeed is 110 − 20 = 90 knots and no sideways correction is needed: true heading 090°. A adds a headwind as though it were a tailwind; C ignores it.

Time is distance divided by groundspeed; convert minutes to hours before multiplying by the hourly fuel rate

Original unit-check framework for questions 1–3. The formulas assume the supplied constant segment conditions; no full-flight fuel plan or reserve is calculated.

What are the answers and explanations for questions 5–7?

Show the answer
  1. C — The northerly wind pushes the airplane south, so correct left, toward north. For this perpendicular-wind setup, WCA = arcsin(20/100) = 11.5370° left; true heading is 90 − 11.5370 = 078.4630°, and groundspeed is √(100² − 20²) = 97.9796 knots. Rounded results are 078.5° true and 98.0 knots. A corrects the wrong way; B subtracts a crosswind as though it were entirely a headwind. The PHAK wind triangle explains the vector relationship; these numbers are our separate calculation.

  2. A — Standard temperature is 15 − 2 × 3 = 9°C. The excess is 30 − 9 = 21°C, so approximate DA is 3,000 + 120 × 21 = 5,520 feet. B ignores nonstandard temperature; C uses a different temperature excess. Keep the approximation separate from chart-specific performance and the effects omitted from this shortcut (FAA Safety Briefing, printed page 14).

  3. B — CG is 90,000/2,000 = 45.00 inches aft of datum. Dividing moment by weight cancels pounds, leaving inches. A loses a factor of 1,000; C does not follow the moment/weight relationship (PHAK Chapter 10).

What are the answers and explanations for questions 8–10?

Show the answer
  1. A — Remove 20 × 6 = 120 pounds and its moment, 120 × 48 = 5,760 pound-inches. Remaining weight is 1,880 pounds and moment 84,240 pound-inches; 84,240/1,880 = 44.8085 inches, rounded to 44.81. Removing weight aft of the original CG shifts it forward here. B assumes CG cannot change; C removes moment without removing weight. Actual tank geometry and approved limits still matter (PHAK Chapter 10).

  2. C — At the temperature midpoint, total distance is (1,400 + 1,600)/2 = 1,500 feet. A is the interpolated ground roll, (900 + 1,100)/2 = 1,000 feet, with a different endpoint; B is the 30°C total. This exercise's interpolation permission is explicit; actual chart methods and notes govern (PHAK Chapter 11).

  3. B — An editable percentage does not supply valid aircraft data. The fictional dry-paved table establishes no wet-grass capability, and its roll column is not a universal surface correction. Match the actual POH/AFM, conditions and supported procedures; resolve missing information rather than inventing a factor. 91.103(b) addresses takeoff/landing information, and 91.9 requires compliance with applicable operating limitations.

How should you review a missed answer?

Name the error before repeating the calculation: unit conversion, wind direction, altitude input, moment accounting or chart assumptions.

Rework a fresh set of numbers and explain why the result is plausible. At 96 knots, a 72-NM segment must take less than an hour; removing aft weight should not move this exercise's CG farther aft. A plausible magnitude helps catch a setup error, but does not validate unsuitable source data. For actual planning, 91.103 requires the broader relevant flight information, including fuel requirements for the flights described in paragraph (a).

Frequently asked questions

Are these actual FAA knowledge-test questions?

No. All 10 are original study items, with fictional inputs and original teaching graphics. The FAA references support the methods; the FAA has not approved this quiz or its answer choices.

Will a mechanical E6B show every decimal in the key?

No. The displayed decimals come from independent arithmetic and vector checks. Mechanical readings depend on scale and alignment. Compare with the requested rounding and explain any reading difference; extra displayed digits do not make fictional inputs operational data.

Is the calculated 5.4 gallons the required departure fuel?

No. It covers only the stipulated constant-rate cruise segment. Other phases, expected conditions, contingencies, usable fuel and applicable reserve requirements need a complete, separate assessment using the actual aircraft and operation.

Does completing this quiz provide an endorsement?

No. FirstSolo.ai is solely a study tool and does not issue FAA endorsements or flight approvals, now or in the future. A practice score does not establish written-test eligibility or flight readiness.

Sources and review

Last reviewed November 13, 2026. All exercise inputs, choices, calculations and graphics are original; their methods were checked against these primary references.

What should you practice next?

Return to the performance hub, revisit the E6B method and takeoff-chart steps, then practice performance and limitations on FirstSolo.ai. Explain the inputs and assumptions as carefully as the arithmetic.

About the author

Sam Whitaker, Student Pilot

Sam is a student pilot training in a Piper Warrior outside Denver, Colorado, fitting lessons around a full-time job. He writes up the practical side of the FAA written, from booking the test to what to bring on the day, with the FAA source for every rule.

Last reviewed Nov 13, 2026All guides by Sam

Keep going

Start here · PerformanceAircraft Performance: Private Pilot Guide
Practice this topic

A fresh question from the FAA references every time, graded by an AI DPE

Start with 50 free credits.

Start free